trailer brake controller

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / trailer brake controller (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

macpryor59

Member - Posts: 1

Joined: May 19, 2010

Location: California, United States

Posted: May 19, 2010 at 12:42 PM / IP Logged

My bosses 07 Silverado has no power to the red / black stripe wire to the controller. I cant seem to find any blown fuses. The decimal point lights when you press brake pedal and all trailer lights work, just no trailer brakes. Can anyone help?

Back to Top

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: May 19, 2010 at 1:59 PM / IP Logged

hi,

under the hood, left side. between the fusebox and left fender, there is a RED / black wire with a ring terminal attached. cut the tape holding the wire bundle in place, run wire forward to front edge of fusebox. remove cover of fuse box, locate two studs at front edge...M6 and M8 threads. select M8 stud, place terminal onto stud, fasten with nut. should have power now. replace cover.

m

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trailer brake controller

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.