the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

HID problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: February 19, 2004 at 11:53 PM / IP Logged  
i put apair of hella HID kit in my '01 xterra when i first bought it. now almost 3 years later im having a little problem.one of them goes to turn on and flashes then shuts off. it was doing this for a while so if i would turn it on and off a few times it would eventually stay on. now i cant get it to stay on at all. could the ballast go bad??.or would a relay or loose wire be the problem??is is possible to send it to hella to repair it or is it easier to buy new ones
please le me know what u think it is
thanks
nunogtp 
Member - Posts: 10
Member spacespace
Joined: January 27, 2004
Location: United States
Posted: February 20, 2004 at 8:24 AM / IP Logged  

sounds like the ballast is blown. it's been a while your waranty may be outdated. you might have to buy a new ballast.

carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: February 20, 2004 at 9:54 AM / IP Logged  
thats what i thought. shold i call up hella and see if they can get one for me or is it just better to go buy a whole new set??. i dont wantto buy a new ballast and then the other one blows 2
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: February 27, 2004 at 9:45 AM / IP Logged  
ok when i was looking around on yahoo the other day cause i decided just to buy new ones instaed of screwing around with send the ballast to hella and waiting and then im going to have a new ballast and an old one and if the other blows out then it was just a waste..but any way,i was looking around an a came across a tutorial on installin them that i wanted to look at. now when i installed my first ones i put a relay for each ballast. this tutorial showed them pluging the balast power wires right in to the stock harnes without any relays isthat good. wont u burn out the harnes or blow fuses like that??? isnt it a little safe with atleast one relay or maybe even 2 like i did??
let me know thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer