how to fit neons?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / how to fit neons? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

muir_gordon41

Member - Posts: 1

Joined: January 09, 2006

Location: United Kingdom

Posted: January 09, 2006 at 6:19 AM / IP Logged

hello there, i just got some neons for my first car and i havnt a clue how to fit them! I was going to put two in the boot and two in the front, just wondering if any1 could sujest which wires i should connect them to? where are typical 12v connections and what would be suitable for an earth?

firelizard

Copper - Posts: 54

Joined: January 02, 2006

Location: Canada

Posted: January 09, 2006 at 8:12 PM / IP Logged

What kind of connectors came with them? If they're bare wires, tap the rears into the boot light I guess, and the fronts to either the cig plug wiring with a switch

you can use any bare chassis metal for an earth, I used an air conditioner bracket behind the dash for my headunit.

ken8801

Member - Posts: 1

Joined: January 31, 2006

Location: United Kingdom

Posted: January 31, 2006 at 1:29 PM / IP Logged

Neons that I have been looking at have an inverter? If I were to wire it off the boot interior light (so when the boot is opened light comes on) how would I do so? I Ideally want neons that dont have inverters or have them built in so it is all neat?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to fit neons?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.