building led tail lights, 93 Mustang

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / building led tail lights, 93 Mustang (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mfb_306

Member - Posts: 1

Joined: January 31, 2006

Location: United States

Posted: January 31, 2006 at 12:48 AM / IP Logged

I am building these led tail lights for my 93 mustang 5.0 I drew the plans on autocad.I cut the pieces out of lexan to secure the led's to then mount on the inside of my tail lights.Any advice is needed there is a total of 77 10mm led's per side,is that to many and also what is the best way to go about wiring it.

Back to Top

firstrax

Copper - Posts: 113

Joined: January 18, 2006

Posted: January 31, 2006 at 9:49 AM / IP Logged

You could simplify things by using one or two Lumileds LXHL-LD3C leds. Use a constant current regulator as shown in the picture.

Back to Top

firstrax

Copper - Posts: 113

Joined: January 18, 2006

Posted: January 31, 2006 at 9:50 AM / IP Logged

Forgot the picture.

building led tail lights, 93 Mustang -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

building led tail lights, 93 Mustang

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.