Fuse size for neons / cold cathode

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Fuse size for neons / cold cathode (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: February 09, 2006 at 12:16 AM / IP Logged

What fuse should be used for a typical neon setup? Each set of lights is in a different location and will have their own fuse.

Also, what size fuse do you think I should use for a dual window roll up module?

Back to Top

infinkc

Copper - Posts: 438

Joined: October 28, 2002

Location: United States

Posted: February 09, 2006 at 10:02 PM / IP Logged

i would go with a 7.5 for the neons and for the windows look at what the factory uses for the windows and stick with that value, if they fuses blow go to the next size up, better safe than sorry

There are 10 types of people in the world, ones that understand binary and ones that dont.

Back to Top

coppellstereo

Silver - Posts: 785

Joined: November 21, 2005

Location: United States

Posted: February 10, 2006 at 1:02 PM / IP Logged

Thanks for the advice.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fuse size for neons / cold cathode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.