Indicator Problem

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Indicator Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

c110gtr

Member - Posts: 6

Joined: June 04, 2006

Location: Australia

Posted: June 04, 2006 at 6:50 AM / IP Logged

My front indicator is not working properly, (parkers on front are same as the indicators) when you pull the switch to parkers on and right indicator on (drivers side) the light stays on it doesnt blink the passenger side goes off as normal.

When you put the left indicator (passenger side) it works fine blinks but the drivers side indicator stays on.

Rear indicators work fine, if the switch is pulled all the way to headlights on everything works fine.

The issue only comes when the parker lights on.

Any ideas how to solve the problem?

c110gtr

Member - Posts: 6

Joined: June 04, 2006

Location: Australia

Posted: June 04, 2006 at 4:36 PM / IP Logged

Its for a 1963 Datsun 1200 Pickup or N320 Series

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Indicator Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.