alarm led

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / alarm led (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scorpio007

Member - Posts: 2

Joined: June 24, 2006

Location: United States

Posted: June 30, 2006 at 10:28 PM / IP Logged

I am installing a alarm in my truck and I don't like the LED the alarm came with it is large and looks goofy. I want to change it out for a different LED, the one I like is a 3.7 volt. The output on my alarm is 2.0 volt . I know if you put to much voltage to a LED it will burn out. What I want to know is does this work the other way too. If there is not enogh voltage will the LED power on or be Dim. any help apriciated.

Keep it custom!

Back to Top

crcustoms45

Member - Posts: 29

Joined: February 15, 2006

Location: United States

Posted: July 17, 2006 at 2:30 AM / IP Logged

leds can be very finiky. i would reccomend that you get an led as close to the output voltage as you can, you will know right away if it isnt going to work. its just an led, hell just try it man!

Chris

CRCustoms

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm led

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.