02 toyota tacoma headlights

What are you trying to "get done"....? You say you installed a keyless, R/S,  and now your headlight don't work. Are you looking to make the parking lights flash when you lock and inlock....?   In your post there are too many  r's, and rl's, and Rw's...you see. Its VERY confusing to read. What are you tring to do, what part of the install are you having problems with?

Sorrry about being so confusing other night had a little to much to drink lol. Ok I installed keyless entry for door locks and thats it. So only thing I touched was flashers. Wierd  thing is everything was working fine for about ten mineuts then went to park it nd went inside for about 2 hours came back out and headlights stopped working only high beam flash and still the only thing that works on combination sw. Looking at a wiring diagram and everything looks rights. Ill start with headlight relay.I have 18guage R-W  going to back of fuse block then coming out to combo switch. Then I have another 18guage R-L from comb switch to back if fuse block and looks like connecting to R-W. Then I have B-Y going to both headlight fuses LH RH 10 amp. Then R-L going to one of headlight from fuse and R-W going to other headlight from fuse. Now back to switch I have R-Y going to front of fuse block then coming out to J/C connect and Then coming out to LH and RH headlights. Back to comb switch last wire is R-G and is going to back of fuse block and connecting with LG and LG goes to high beam indicator  and continues in W/B to ground. Then R-G from back of fuse block continues to J/C then goes to both headlights.Then W/B from ground goes to comb sw. Now like I said only lights working from that comb sw is taillights and flash and didnt touch anywires just mentioned so thinking switch went out or maybe disconnected ground somewhere by accident. and headlight relay only clicks when flashers come on. Anybody know what might be problem tested headlight relay its good tested headlights 1 and 2 fligments good. thank uthe blazer man