Trailer wiring with leds

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Trailer wiring with leds (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

theluxfactor

Member - Posts: 1

Joined: October 04, 2006

Location: Canada

Posted: October 04, 2006 at 7:45 AM / IP Logged

I've replaced two tail/stop/turn incadscent lights with 2 tail/stop/turn leds on my trailer and the problem I'm having is they only work when the pinal hook and ring are contacted. There is a ground throu the 6 way connector and its good as it runs the clearance lights. I can have one incadscent and one led hooked up and everything works fine. Any help would be great

Thanks

Back to Top

MikesMarine

Copper - Posts: 47

Joined: November 17, 2004

Location: United States

Posted: October 16, 2006 at 8:21 PM / IP Logged

im gonna guess one of the lights ground isnt connected to the wire right, and is contacting the trailer frame. this completing the circuit when hooked up, but not when you just have the wires connecting

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Trailer wiring with leds

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.