04 dodge ram 3500 hid problem

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 04 dodge ram 3500 hid problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lowaintenough

Member - Posts: 2

Joined: June 14, 2007

Location: United States

Posted: June 14, 2007 at 7:54 AM / IP Logged

I'm trying to convert my 04 dodge ram 3500 to hid.I have tried the 1k ohm resister between the low beam and ground but I'm not getting a constant 12 volts it is more like a flasher on off on off on off on.I found that if I hook up 2 test lights to the factory light plug it (the light)lights up and stays working.I need a constant 12 volts to turn the relay on to turn the hid ballast on.I think if I can fix the flashing problem from the truck it will fix all my problems.any and all help would be greatly appreciated.if you could send me a drawn out wiring diagram and a list of stuff that I need that would be great.

thanks

Shannon Taylor

LOW AINT ENOUGH CUSTOMS

CONROE TEXAS 77306

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: June 21, 2007 at 10:45 AM / IP Logged

Get your "constant" 12 volts from your battery.

Back to Top

Tripnbeats

Member - Posts: 12

Joined: September 25, 2002

Location: United States

Posted: August 02, 2007 at 1:06 PM / IP Logged

dont connect it to the battery use a capacitor if u need more help PM me

Back to Top

precision1698

Member - Posts: 1

Joined: August 09, 2007

Location: United States

Posted: August 18, 2007 at 1:06 PM / IP Logged

I need help with my HIDs in my 05 Dodge Ram. The company sent me a "digital harness" that plugs into my open headlight harness. Then the other end gets t-tapped into the other headlight harness. This harness connects the two grounds and the low beam positives. But my light out indicator is still flasing on the dash.

Back to Top

lowaintenough

Member - Posts: 2

Joined: June 14, 2007

Location: United States

Posted: August 18, 2007 at 9:15 PM / IP Logged

the only way to get the lamp out light to go out and stay out is to wire in another light in with the hid kit.i went to a truck stop and got 2 little lights that could be mountod under the truck and then spray painted them black so they would not be seen. the bulb need to be like a 1157.this puts just enough res.on the system to tell the computer that the lights are working correctly.if yuu have any other ? feel free to e-mail me direct@ lowaintenough@hotmail.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 dodge ram 3500 hid problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.