hid 1 light flickers at startup

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / hid 1 light flickers at startup (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jkmtl

Member - Posts: 1

Joined: July 26, 2007

Location: Canada

Posted: July 26, 2007 at 9:24 PM / IP Logged

HID "plug and play" kit for 96 Olds LSS

drivers light flickers and sometimes fails to light. I have restart car.

passenger side doesn't flicker and lights up right away, all the time

once both lights startup they work flawlessly

I switched balasts but drivers side still flickers on startup

Seems to be a voltage issue because when I disconnect the passenger balast the drivers side lights up right away. If I reconnect the passenger balast the drivers light flickers on startup.

I don't know much about this topic so any help would be appreciated.

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: July 31, 2007 at 9:30 PM / IP Logged

You may need to use relay to power up the system. Seems like your car does not give enough current cu\ausing it to fail sometimes. Use relays to give the lights extra power and the problem should be solved.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hid 1 light flickers at startup

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.