alpine cda 9857

Home / the12volt's Install Bay / Car Audio / alpine cda 9857 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

reuwer

Member - Posts: 1

Joined: December 19, 2007

Posted: December 19, 2007 at 12:50 PM / IP Logged

I've installed into two other cars with no problem.. i have a 1999 sonata. and i have connected everything.. but the power just flickers on and off occassionally.. i have reconnected all the wires multiple times.. and still the same problem.. any suggestions?

thanks.

Back to Top

ldpfeifer

Member - Posts: 18

Joined: April 06, 2003

Location: United States

Posted: December 19, 2007 at 1:33 PM / IP Logged

What are you doing to get the power to flicker on and off? Check your ground to make sure its good. You might try to ground it in another spot. Also, check you power to you fuse, you may have a loose wire, or the fuse, if its the new blade style, may have gone to the outside of the receptor and not in between the two prongs. Also, the plug on the back of the radio may have a loose connector. Good luck and break out the ohm meter.

Lyle

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine cda 9857

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.