ipod connection

Home / the12volt's Install Bay / Car Audio / ipod connection (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: January 19, 2008 at 11:26 AM / IP Logged

afternoon,

installed an ipod cable to a kenwood kvt617dvd. ipod 5thgen video

ipod connector has the following wires

red=power

black=ground

three rca connectors

hooked it up to kenwood unit at aux input for audio/video signal .

i can not get the video on the H/U screen all connections are correct.get excellent sound from ipod for music and video,just no picture? anyone have ideas what might be wrong other than a bad ipod cable? any help is greatly appreciated.

george

rnemtb

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: January 19, 2008 at 12:12 PM / IP Logged

Can you display video from the internal drive? Is the parking brake on?

Support the12volt.com

Back to Top

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: January 19, 2008 at 12:18 PM / IP Logged

parking brake on. dvd's will play fine.no video on video 1 or 2.

rnemtb

Back to Top

Yacht2cool

Member - Posts: 13

Joined: October 08, 2002

Location: United States

Posted: January 19, 2008 at 1:53 PM / IP Logged

On the ipod itself you have to go into your video settings and turn the tv signal out to on, so that it sends the video signal out. Since you said you have audio for the video from the ipod, that should be what your issue is. Hope that helps and if I'm right it should. So once again on your ipod, go into the video settings and there is a selection called tv signal out, turn that to on since it should be off right now, so turn it to on and you should have video.

Back to Top

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: January 19, 2008 at 2:03 PM / IP Logged

turned on tv signal out,still no picture.guessing cable bad

rnemtb

Back to Top

rnemtb

Copper - Posts: 70

Joined: September 23, 2005

Location: New Jersey, United States

Posted: January 19, 2008 at 2:16 PM / IP Logged

thanks to everyone for the help.

rnemtb

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ipod connection

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.