07 kicker 400x1 08 polk db 12

Home / the12volt's Install Bay / Car Audio / 07 kicker 400x1 08 polk db 12 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

absolutepower

Copper - Posts: 98

Joined: November 28, 2007

Location: California, United States

Posted: May 03, 2008 at 6:11 PM / IP Logged

i have a kicker 400x1 only 2 ohm stable. the homie has a polk db 12 2 ohm. when metered it fluctuates from 1.7 to 2 ohms. will this cause the amp to go into protect when gain and bass boost is up to high?

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 03, 2008 at 7:40 PM / IP Logged

This will not be a problem for your amp. When you use a multimeter to test the voice coil, you are reading the DC resistance of the coil. This is different than the impedance of the speaker, which is an AC reading.

absolutepower

Copper - Posts: 98

Joined: November 28, 2007

Location: California, United States

Posted: May 03, 2008 at 8:35 PM / IP Logged

but y is it that every other subs ive tried reading 2 or more ohms dosnt cut the amp then

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 kicker 400x1 08 polk db 12

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.