amplifier

Home / the12volt's Install Bay / Car Audio / amplifier (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

expo01

Member - Posts: 3

Joined: June 06, 2008

Location: Missouri, United States

Posted: June 06, 2008 at 5:01 PM / IP Logged

Amplifier is a Alpine F353. 5 channel amp. It is, I believe, 4x50w plus the 5th channel is mono 200w. I want to know, and have searched with out any results, can this amp be ran 4 ohm in the 4 channels but run the 5th mono in 2 ohm. Will the amp allow this or would everything have to run 4 or 2 ohm.

Thanks in advance for any helpful information.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 06, 2008 at 5:47 PM / IP Logged

As far as I can tell from the manual, this amp will NOT run a 2Ohm load on the sub channel.

http://www.alpine.com.au/downloads/web_owners_manuals/amp_owners_manuals/MRV-F303+MRV-F353.PDF

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amplifier

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.