box flex?

the back of my  sub box gets a decent amount of flex. it also happens that my amps are mounted to the back of the box. is all the extra vibration going to damage my subs in anyway? and should i be having this much moving on the back of my box?

box flex means a very poorly constructed enclosure...it can and will damage the amp.

You need a new box and this time put braces in there to stop the flexing. Your subs will be ok but you are going to destroy the amps pretty quickly with all the vibrations on them....components will literally shake themselves off of the circuit board. Seen it happen many times and made lots of money off of people doing it by replacing the missing components.

Flexing enclosure = piece of crap.Support the12volt.com

It won't damage your subs, but like said before, if you box is flexing it was not built very well. How bad is the flexing? Definetly move your amps and fix or get a new enclosure.

it was just a shotty prefab box just to get me into bumping until i could build a better one. i only get the flex at high volumes.

You only NOTICE the flexing at higher volumes. 

i am an idiot wrote: You only NOTICE the flexing at higher volumes.

good point. ill have to scrape some money together to buy some mdf.  thanks for the help guys.