amplifer selection

I Have A 2002 Ford Ranger Extended Cab Pickup. I Have Purchase A New Pioneer AVIC-F90BT Head Unit. I Have Also Purchased 2 Pair Of Alpine SPR-57C Speakers, 100 Watt RMS Rating@ 4 ohms....I Am Wanting An Amp For These Four Speakers. I Looked At One That Is A JBL GTO75.4 4 Channel Amp. The Specs Are 104 watts RMS X 4 @ 4 omhs. 2 x 30 Amp Fuses And Signal To Noise Is 80db. Or Can You Give Me Some Amps, Brand And Model That Would Work For MeNever 2 Old To Learn, Never To Young 2 Die

 alpine pdx-4.100..........alpine-4.150........look into audison great sq amps

there's lots  brax, helix...whatcha lookin for?   $$?

I'm Looking To Spend About $200....You Know Also, I Found An Alpine Amp That Puts Out 70 X 4 @4ohms....Wondering If That Would Be Enough Or Should I Find Something Else That Put Out Closer To 100 Rms @ 4 OhmsNever 2 Old To Learn, Never To Young 2 Die

 You can get a new Audison SRX-4 on ebay right now for $249.99 ..........Its 85watts by 4 Rms........not as small as the PDX amps but still very small..........I have three of the srx-4 for my front stage and am impressed. 

running 3-ways on those amps boogey?      70w on type r coaxals would b enough.  85 would b better

cadenceclipse wrote: damn, 3 srx-4s on fronts?  freakin better b impressed!  what r they powering?

I'm running a pair of PDX4.150's to my doors. 600WRMS (and a little extra) per side! 150 each tweeter (JL silks) and mid (custom vifa kevlar), 300w each Adire 6.8...It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

so your using 1 pdx per door or...what happened to the srxs??

 1 srx-4 bridged to 2 channels on 2 peerless hds 1' large format tweets..........1 srx-4 bridged to 2 channels on 2 peerless 830870 4" mids.........1 srx-4 channel bridged to 2 channels on 2 peerless sls 8" midbass .......1020 rms watts total to front stage at 4 ohms...But all my fronts are 8 ohm.