fastening wires to sheet metal

Home / the12volt's Install Bay / Car Audio / fastening wires to sheet metal (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

asc1963

Member - Posts: 6

Joined: February 07, 2009

Location: Michigan, United States

Posted: February 07, 2009 at 11:50 AM / IP Logged

Has anyone ever used this kind of wire fastener to fasten wires to sheet metal, like in the trunk or under the IP? I was wondering if they work.

asc

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: February 07, 2009 at 4:08 PM / IP Logged

I've used the wire tie sticky things - little square bases that accept a wire tie.

I really like them, and they are reusable. You just need to make sure you prep the surface correctly - just like with any sticky type solution.

Kevin Pierson

asc1963

Member - Posts: 6

Joined: February 07, 2009

Location: Michigan, United States

Posted: February 07, 2009 at 5:13 PM / IP Logged

Yea, I've used them before. The reason I kinda thought these would work is I'm using them behind a panel that sits real close to the metal, there's hardly any clearance. it's either the wire straps or duct tape.

asc

asc1963

Member - Posts: 6

Joined: February 07, 2009

Location: Michigan, United States

Posted: February 19, 2009 at 8:23 PM / IP Logged

update ... I ordered the wirestraps and they work great. super sticky adhesive and a real neat look. check them out here.

asc

ragsports

Copper - Posts: 192

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 17, 2008

Location: Michigan, United States

Posted: February 21, 2009 at 11:15 AM / IP Logged

what model of the straps did you get?

asc1963

Member - Posts: 6

Joined: February 07, 2009

Location: Michigan, United States

Posted: February 21, 2009 at 4:18 PM / IP Logged

The Professional version ... they claim they are used by the OEM's

asc

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

fastening wires to sheet metal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.