kicker kx1200.1

2 as in 2 voice coils per sub? then no 1ohm or 4 ohm if your running 2 subs

if they was sinlge 4ohm voice coils yes then you could 

the KX1200.1 is 1 ohm stable.

You will be fine power wise too. Just read the How To Set Gain Topic. Wire for 1 ohm. 

[QUOTE=memfus_boi]if you have 2(2)ohm subs, you will be able to play them at a 2 ohm load. But if you have 2 4ohm subs you will able to play them at a 1 ohm load BUT turn your gain down b ecause you will blow your subs. I had kx1200.1 and 2 12L7's and i had my gain almost 3/4 up. go here to see how to wire them up..... https://www.the12volt.com/caraudio/woofer_configurations.asp[/QUOTE]

Gain is to match your preout level. Just going off his subs tells nothing of where the gain should be set.

i was wrong in my first post the kx1200.1 is 1 ohm stable. most of kicker amps are only 2 ohm but i guess this one is 1 ohm.

heres the link that shows http://www.crutchfield.com/S-sh0woJ4mfcy/p_2064KX1200/Kicker-KX1200-1.html