crossover

Home / the12volt's Install Bay / Car Audio / crossover (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dred

Copper - Posts: 158

Joined: May 13, 2008

Location: Saint Vincent

Posted: March 13, 2009 at 3:24 PM / IP Logged

hey guy i want to buy a crossover for my sound system its the Clif Designs CDQ3X i want to put 2 pioneers TS-s20 on the front channel of the crossover high pass on my amp. I was wondering what does the frequency multiplier DO 1x-20x does?? helpp

dre

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: March 13, 2009 at 7:40 PM / IP Logged

It's a multiplication factor for the setting of that control. So, if the dial says, say, "100" at 1X that's 100Hz, and at 20X that's 2000Hz.

I assume you are setting up a powered component set? What's the speakers and what's your target XO frequency for the tweeter?

Support the12volt.com

Back to Top

dred

Copper - Posts: 158

Joined: May 13, 2008

Location: Saint Vincent

Posted: March 14, 2009 at 5:40 AM / IP Logged

i am going to put the tweeters on the front high pass channel which the frequency multiplier they are pioneer TS-S20's

dre

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

crossover

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.