the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp goes in protect mode.


Post ReplyPost New Topic
< Prev Topic Next Topic >
highhilltx 
Member - Posts: 11
Member spacespace
Joined: March 14, 2009
Location: Texas, United States
Posted: March 16, 2009 at 12:34 AM / IP Logged  
i have a hifonics 1500 brutus class d on 4 kicker cvrs 10s dual voice coil. the systems plays good, amp does not even get warm, if i play my music, cut my car off, and turn it back on the amps goes to protect mode. whenever the amp starts playing again, it plays the music fine, never cuts off in the act of music playing, but if i turn da car off, and turn it back on the amps goes to protect. pls help.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 16, 2009 at 6:51 AM / IP Logged  

Where did you get power for the remote terminal of the amp?  Factory deck, aftermarket deck??

highhilltx 
Member - Posts: 11
Member spacespace
Joined: March 14, 2009
Location: Texas, United States
Posted: March 16, 2009 at 1:05 PM / IP Logged  
i got a jvc El Kameleon KD-AVX44 A/V. i got the remote to the amp, on 'remote out'  from the radio, i also have a audiocontrol epic 160 hooked up with the radio. i too have it on the remote out. i know it has to be something with the remote, because whenever the amp is in protect mode, my epicenter bass/power light blinks together, unless something is wrong with the epic, causing it tomess with the remote on the amp
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: March 16, 2009 at 3:34 PM / IP Logged  
move the amp remote wire to the red wire behind the radio and see what that does.
highhilltx 
Member - Posts: 11
Member spacespace
Joined: March 14, 2009
Location: Texas, United States
Posted: March 16, 2009 at 9:53 PM / IP Logged  
thank u, i also did that today, and its still doing the same, i think something is wrong with da amp/ and the epic is getting a signal through the rcas causing it to blink with the amp

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer