the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hi fonics cupid


Post ReplyPost New Topic
< Prev Topic Next Topic >
dablack 
Member - Posts: 2
Member spacespace
Joined: June 06, 2009
Location: Ontario, Canada
Posted: June 06, 2009 at 3:16 PM / IP Logged  

does anyone know what the colors represent for the wiring harness for this amp..or better yet what color is the remote for this

Many thanks in advance

i am an idiot 
Platinum - Posts: 13,674
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 06, 2009 at 3:50 PM / IP Logged  

What are the colors of the wires you have?   Is it a 1 or a 2 channel amp?  If there is an Orange wire, chances are that will be the remote wire.  If it is a 1 channel amp, Violet is positive and Grey is negative.  If it is a 2 channel, violet is left positive.  Grey is right negative, these 2 are the bridge wires.  The other 2 wires are connected together inside the amp, one is left negative and the other is right positive.  It does not matter which wire you use for which channel. 

If memory serves me right, green is left negative.  Brown is right positive.

dablack 
Member - Posts: 2
Member spacespace
Joined: June 06, 2009
Location: Ontario, Canada
Posted: June 06, 2009 at 3:55 PM / IP Logged  
green,grey at bottom...... brown,orange,purple on top (label of amp as top side)
i am an idiot 
Platinum - Posts: 13,674
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 06, 2009 at 4:03 PM / IP Logged  

Looking at the amp, with the 3 pins on top.  Bottom row are negative.  Top row is all positive.  Center pin is remote.   Left side is left channel   right side is right channel.  Bridge is Left top and right bottom.   That is looking at the amp not the plug.

Notice in this picture the green and brown wires are connected together. Also notice that the Violet and Grey wires are connected to the output transistors. The orange wire connects directly to the Pulse Width Modulator IC of the power supply.

http://www.bcae1.com/repairbasicsforbcae1/repairbasics.htm   At the very bottom of this page is a diagram of your plug.  It has the wire colors and all.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer