kenwood kdc-c462fm Ford Taurus

Home / the12volt's Install Bay / Car Audio / kenwood kdc-c462fm Ford Taurus (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Pokey

Member - Posts: 1

Joined: April 01, 2003

Posted: April 01, 2003 at 1:32 PM / IP Logged

does anyone know if the Kenwood kdc-c462fm will work in a 1997 ford taurus??

I have a chance to buy one but i do not know if it will fit.

Thanks in advance

Pokey

Back to Top

turbotalon1

Member - Posts: 6

Joined: February 05, 2003

Location: United States

Posted: April 01, 2003 at 5:05 PM / IP Logged

what is it? a changer?

Back to Top

tdsteele

Silver - Posts: 393

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 22, 2003

Location: United States

Posted: April 01, 2003 at 5:26 PM / IP Logged

From what i found it is a 6-disc changer with FM Modulator, so it was made to work with any radio through a fm radio station, usually a lower one like88.1 or something, but what do you mean by will it fit?? One i had before we mounting the controller to the dash with velcro and put the changer in the trunk of the car and it worked great.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood kdc-c462fm Ford Taurus

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.