the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

BOSS amp problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
Iamoxx 
Member - Posts: 3
Member spacespace
Joined: January 10, 2003
Location: United States
Posted: April 08, 2003 at 6:01 PM / IP Logged  
amp is supposed to work, but comes on red protect light and beeps green power light. installer said something inside is burnt out, possibly power supply or something. any ideas?? its a BOSS Rev3000D. also, estimated actual rms power for it??
OXX
CCRoadshop 
Copper - Posts: 70
Copper spacespace
Joined: April 01, 2003
Location: United States
Posted: April 09, 2003 at 6:47 AM / IP Logged  
its prolly fried.......get it services....or get a different amp than BOSS
Installer - Circuit City Roadshop(2 1/2 years n counting)
------------------
Alpine CDA7894(soon to be the cda9815)
Pioneer XM unit(soon to be direct link alpine)
Audiovox 995C alarm/remote start
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 10, 2003 at 9:41 AM / IP Logged  
Might not be fried try and disconnect the rca inputs and the speaker output (speaker wire) and turn it on let me know if it goes into protection mode. I have tested that amp and it puts out just over 1200 watts @ both 1&2 ohms.
Iamoxx 
Member - Posts: 3
Member spacespace
Joined: January 10, 2003
Location: United States
Posted: April 10, 2003 at 2:59 PM / IP Logged  
its been tried with just the power ground and remote hooked up and with rcas and speakers, protection mode red light with blinking green power light. any idea what it puts out at 4 ohms?? or, if i get it working, is it a "good enough" amp to run at 1ohm to a RF power hx2 12"- 1000rms??? thanx.
OXX
bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: April 10, 2003 at 3:50 PM / IP Logged  

So with the rca and speakers disconnected it still goes into protection mode? If so then it is bad. I have no idea what it puts out at 4 ohm. It’s not worth fixing Boss is the bottom of the line in car audio and I don’t think too many people would disagree with me. If you want a good quality amp I would go with a JBL 1200.1 It has an attractive price and puts out good clean power. However Boss is not very strict when it comes to warrantee. If your amp is out of warrantee or you don’t have a receipt you can make one up on your computer and BOSS will most likely repair your amp( although I don’t promote dishonesty ). But I would suggest you go with the JBL 1200.1 it will sound a lot cleaner and its a lot more reliable it can also be run at 1 ohm. Here is a link to some info on the JBL http://www.sounddomain.com/sku/JBLBP12001 bu you can find it much cheaper on other sites http://www.pricegrabber.com/search_getprod.php/masterid=525792/search=jbl%25201200/ut=1837088145a3a4b8 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer