the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

alpine iva d106 no sound


Post ReplyPost New Topic
< Prev Topic Next Topic >
screwedsvt 
Member - Posts: 4
Member spacespace
Joined: March 13, 2010
Posted: March 13, 2010 at 9:55 PM / IP Logged  
when source is on radio, speakers are active. when i switch over to dvd/cd no sound, anyone know why?
yimke 
Copper - Posts: 417
Copper spacespace
Joined: June 23, 2009
Location: Nebraska, United States
Posted: March 14, 2010 at 12:14 AM / IP Logged  
Switch your blue and blue/white wire around and you should be good.
screwedsvt 
Member - Posts: 4
Member spacespace
Joined: March 13, 2010
Posted: March 14, 2010 at 1:58 AM / IP Logged  
yimke wrote:
Switch your blue and blue/white wire around and you should be good.
switch to what? I have the power ant spliced into the 12v trigger on the ant adapter and the blue/white wire isn't connected to anything. The radio will play sound but not iPod, cd, or DVD.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 14, 2010 at 7:33 AM / IP Logged  
Conect the blue white wire instead of the blue.  The blue wire only has power on it when the tuner is on.  The blue/white wire is hot any time the unit is powered up.  Blue is for antenna.  Blue/white is for power amp turn on.
screwedsvt 
Member - Posts: 4
Member spacespace
Joined: March 13, 2010
Posted: March 14, 2010 at 2:56 PM / IP Logged  
Right...That's how I have it....I dont have amps. BlUE/WHITE wire is connected to a remote wire ran to the trunk empty waiting for amps. The Blue wire is connected to the antenna, like its suppose to be.
Either Im confused, or i am not explaining myself correctly.
Currently in a 2000 MBZ E320 I installed the alpine ivad106. I have amps, but no speakers for the doors yet, in the mean time I just want it hooked up to the factory bose system.
the blue/white wire is for amps, that is connected to a 20ft wire pre-ran to the trunk for the amps connected to nothing. the blue wire is connected to the antenna adapter (VWA2B- scosche amplified antenna adapter) I needed to get to still be able to use my FM. the foot brake + hand brake are connected to the PacTR7 (this was installed after I noticed the radio would play sound, but not cd, part of my troubleshooting). 12v is to 12v, ground is to ground, switched lead to ACC, the audio interupt goes to nothing and the highspeed ipod cable is plugged in.
When the Head unit is turned on. source is on radio. speakers are loud, music is playing, we're jamming. when i switch source over to CD/DVD; no sound, cant hear anything, elapse time on the disc is going, video works, but no audio.
When i switch over to IPOD, same thing, on the actual unit it is playing the song, but nothing is coming out from the speakers. switch back to radio, back to jamming.
i dont mean to sound like a jerk, just trying to explain everything to the T
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 14, 2010 at 5:43 PM / IP Logged  

Your vehicle has a factory installed amplifier.  The wire on your harness is labeled antenna.  It also controls the factory installed amplifier.  Disconnect the blue wire from whatever you have it connected to, and now connect the blue/white wire to the wire you just disconnected the blue wire from.

You were explaining yourself perfectly fine.  This is a common problem.  The solution provided WILL fix your problem. 

i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
screwedsvt 
Member - Posts: 4
Member spacespace
Joined: March 13, 2010
Posted: March 16, 2010 at 4:05 AM / IP Logged  
i am an idiot wrote:
https://www.the12volt.com/installbay/forum_posts.asp?tid=77366&KW=cd+blue+blue%2Fwhite
Thank you for the help, I ended up taking the unit back to the place I bought it from, they told me the same thing, but when they checked it out, they couldnt figure it out. swapped the unit, and worked great.
i am an idiot 
Platinum - Posts: 13,670
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 16, 2010 at 7:07 AM / IP Logged  
So they swapped the unit and left the blue wire connected and it all worked????

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer