wiring 24 woofers to 1 amp.

Home / the12volt's Install Bay / Car Audio / wiring 24 woofers to 1 amp. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

midnightfocus

Member - Posts: 2

Joined: April 03, 2010

Location: North Carolina, United States

Posted: April 03, 2010 at 8:28 AM / IP Logged

Im trying to figure out a way to wire 24 svc woofers to 1 amp, i have 2 amps i can wire them to, a two channel or a mono-block, the mono-block is stable at 1 ohm, has ran at .5 ohms fine. The two channel amp is 2 ohm stable per channel or 4 ohm stable bridged, is there anyway i can wire this down to have all 24 woofers on Either amp? they are not designed for bass but im bored and doing a project for school and figured i would mess around with these, they came pretty cheap at 69cent a pair, so im not worried about if i blow them. i think there like 5 rms per, the two channel amp is 75 rms at 4 ohms per channel, 110 rms at 2 ohms per channel. the mono block is 2400rms at 1 ohms, 1,600 x 1 RMS at 2 ohms, and 800 x 1 RMS at 4 ohms... im not worried about power, i can always turn down the amp gain/radio settings to match the speakers, no matter how small...

Back to Top

midnightfocus

Member - Posts: 2

Joined: April 03, 2010

Location: North Carolina, United States

Posted: April 03, 2010 at 8:31 AM / IP Logged

Note* they are 4ohm SVC woofers.

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: April 03, 2010 at 9:41 AM / IP Logged

Start off by making 12 pairs of series woofers giving you 12 8ohm sets. Then parallel 6 pairs giving you 6 sets of 4ohm speaker systems. Wire 3 pairs in series giving you 3 8ohm systems. Wire each of those to the monoblock amp for a 2.66 ohm load.

Kevin Pierson

Back to Top

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: April 03, 2010 at 9:53 AM / IP Logged

wiring 24 woofers to 1 amp. -- posted image.

Kevin Pierson

Back to Top

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: April 03, 2010 at 9:54 AM / IP Logged

The "green" lines turned out more black - sorry about that.

Kevin Pierson

Back to Top

4g15

Member - Posts: 1

Joined: April 07, 2010

Location: Malaysia

Posted: April 07, 2010 at 4:26 PM / IP Logged

how 2 notify power output watt and ohm from my amplifier???

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring 24 woofers to 1 amp.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.