avic n2 ribbon cable

Home / the12volt's Install Bay / Car Audio / avic n2 ribbon cable (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bes4420

Member - Posts: 1

Joined: December 31, 2005

Location: United States

Posted: April 30, 2010 at 10:52 AM / IP Logged

Greetings,

I have an AVIC N2 that has had the upgraded ribbon cable repair done about 2 to 3 years ago. The system is malfunctioning again...blank screen, stations changing by themselves as well as the volume going up and down automatically. Does this sound like the ribbon cable issue again and if so, how difficult is the repair? I know I can get the cable on ebay for 50 to 60 dollars, but how difficult is the repair?

Bill S

i am an idiot

Platinum - Posts: 13,673

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: April 30, 2010 at 12:10 PM / IP Logged

Do you have tons of patience? They left out the "Do not try this at home" notice in the service manual. it is not a very difficult task, but by far not the reccomended first radio repair for anyone.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avic n2 ribbon cable

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.