how are these required to be wired

Home / the12volt's Install Bay / Car Audio / how are these required to be wired (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

neek804

Member - Posts: 18

Joined: July 10, 2010

Location: Virginia, United States

Posted: October 20, 2010 at 11:31 PM / IP Logged

My Subs(i have 2)

http://www......com/item_8333_Pioneer+TS-W257D4.html

My Amp

http://www......com/item_8518_Alpine+MRP-M850.html

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 21, 2010 at 3:02 AM / IP Logged

Option 2 (series/parallel) = 4 ohm load

Voice coils wired in series, speakers wired in parallel

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

how are these required to be wired -- posted image.

Back to Top

neek804

Member - Posts: 18

Joined: July 10, 2010

Location: Virginia, United States

Posted: October 21, 2010 at 9:37 AM / IP Logged

Subs cut off when volume is turned up on HU and all amp settings are low

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 23, 2010 at 5:13 PM / IP Logged

Do you have a volt-ohm meter to first verify that you do have the speakers wired to a 4 ohm load? And secondly verify that the amp is getting 12 volts across the power and ground terminals of the amp, with the amp playing just below the level in which it shuts off.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: October 23, 2010 at 5:24 PM / IP Logged

https://www.the12volt.com/installbay/forum_posts.asp~TID~85479~PN~1

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how are these required to be wired

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.