18 gauge speaker wire and alpine pdx ok?
Home /
the12volt's Install Bay /
Car Audio / 18 gauge speaker wire and alpine pdx ok? (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: November 10, 2010 at 2:28 PM / IP Logged
I am in the process of installing my system into my 2011 WRX. I have installed many systems before and I am tired of tearing apart the door grommets and running wires. I am using a PDX 4.100 for my front CDT Braxial kit w.passive X-over. I want to use the Metra Quick Cable 18-gauge bundle wire to run from the amp back to the stock harness and use the stock wiring. IS this OK or will sound degrade dramatically? See Pic for bundle Quick Cable. will this cable not be good enough for the 75w x4 PDX?
Posted: November 10, 2010 at 2:31 PM / IP Logged
I can not get the picture of the Metra Quick cable to work
Posted: November 10, 2010 at 4:11 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
