no sound alpine iva d106 with imprint

Home / the12volt's Install Bay / Car Audio / no sound alpine iva d106 with imprint (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 01, 2011 at 8:39 PM / IP Logged

No audio when switching from tuner to cd/dvd or ipod yes my car has a built in amp but is disconnected, i have a 4ch kenwood excelon installed, all new wires running from front to rear 4ch controlling my highs. cant figure this out any help would be greatful!!

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 01, 2011 at 9:18 PM / IP Logged

Is there a rectangular cut out in the bottom cover of the alpine unit? Is the white switch under the cut out set to norm, or eq/div?

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 01, 2011 at 9:22 PM / IP Logged

set to eq/div

right/right

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 01, 2011 at 9:25 PM / IP Logged

Have you switched it to normal for troubleshooting purposes?

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 01, 2011 at 9:39 PM / IP Logged

I have not

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 02, 2011 at 11:46 AM / IP Logged

What is new to the system? Try removing the processor from the equation. Do you have sound with only the deck connected?

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 02, 2011 at 3:42 PM / IP Logged

new installation, set to norm still same problem, without imprint hooked up same problem. I cant seem to figure this out and this by far is not my first rodeo.

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 02, 2011 at 6:05 PM / IP Logged

Do you have a set of powered computer speakers you can use to check and see if you have signal getting to the amp?

Have you used a meter to verify that there is a connection between the amp and the speakers? Or a battery to pop them?

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 02, 2011 at 6:16 PM / IP Logged

but i have sound when the radio is on only so i know there is a connnection between the rca's and the speakers.

etronicbmw

Member - Posts: 10

Joined: February 01, 2011

Location: Connecticut, United States

Posted: February 02, 2011 at 6:19 PM / IP Logged

when listening to the radio (Tuner) i have audio but when switched to ipod or cd no sound ive checked to see if amp is powered down with ipod or cd it still has power just no sound.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.