mini to std din, balanced lines

I need to make a couple balanced lines with a 6 pin mini DIN male connector on one end and a standard size 5 pin DIN male connector on the other end. Purpose is for use with a Soundstream Balanced Line Transmitter and hooking it to an Orion 4100gx which uses standard 5 pin DIN female chassis mount jacks for the inputs. It does not have any RCAs for input jacks. Is there any reason I can't use the Soundstream BLT with the Orion amp? If not, then what I need to know is what type of cable to use and how many conductors the cable must have. I was thinking the BLT only would use 4 of the 6 terminals on the mini DIN and so I could buy some type of 4 conductor cable, but I don't know what cable to use with this project, so if anyone can help point me in a direction to find a cable on an on line electronics supply store, I would be much appreciative. Any other thoughts on this are also welcomed. Thanks, MikeChronic, late stage optimist.

Hello? Someone out there must have some answers to this question!Chronic, late stage optimist.

two pair of shielded twisted pair