amp switch repair

Home / the12volt's Install Bay / Car Audio / amp switch repair (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ncc74656

Copper - Posts: 71

Joined: April 27, 2011

Posted: February 26, 2013 at 2:52 PM / IP Logged

i bought an eclipse amp for pretty cheap on craigs list and it has an issue with its switches to select mono/stereo and low pass/high pass filter. they are less than solid and cause the amp to cut out while driving due to vibrations. where can i buy replacement switches for this and or would de soldering them and simply using jumpers be an acceptable fix?

the amp is used for my mids and highs and is a Eclipse 34320 2 channel amp

here are two pictures of the amp/ switches im talking about.

switch pic

amp pic

thanks

Back to Top

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: February 27, 2013 at 12:04 AM / IP Logged

There may be other switches that can be used. It's initially a matter of finding what pin pitch/spacing they use.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp switch repair

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.