bit one

Home / the12volt's Install Bay / Car Audio / bit one (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wrench722

Member - Posts: 1

Joined: January 06, 2014

Location: Texas, United States

Posted: January 06, 2014 at 5:58 PM / IP Logged

I have two Bit One's, one is used for my highs, mids and mid/bass. I want to use the other one for my subs and trying to calibrate the master input levels with sub R/L RCA's out of AVH-P8400BH, it keeps saying (Input Level too low). Should I hook up the front R/L to it and do the calibration and remove the front R/L and hook the sub R/L back up?

Too Loud Too Old

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: January 12, 2014 at 9:56 AM / IP Logged

Make sure the subwoofer output on your Pioneer is turned on and set the level to max. See page 58 of your owner's manual. Also make sure you are playing a test tone that is in the subwoofer pass band.

Support the12volt.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bit one

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.