2014 Ford F-150, No Ambient Temp Display After New Head Unit

Hello everyone - My vehicle is 2014 Ford F150 STX with SYNC and steering controls. I recently purchased a Pioneer head unit Pioneer MVH-S622BS (and separate Sirius module). It was supplied with a wiring harness from the retailer that was steering control compatible (PAC RP4-FD11 Wiring Interface) After the install the FDIM screen (horizontal monochrome data screen upper center of dash) - was no longer functional. 90% of the screen information was radio/cd information so I expected there wouldnt be much information displayed on that screen after the installation but its completely dead. I dont even get "built ford tough" on start up or ambient air temperature. The retailer supplied harness and module were not Sync compatible and when i asked the retailer regarding the dead screen issue the told i need an iData link compatible deck and iData link module. I questioned this a couple times and was told that regardless of the interface the screen would be non-functional. Its frustrating and i am hoping for some reliable information. It's just odd to me that while the OM deck was malfunction or after it had dies I still had outside air temp and "built ford tough" on startup but now nothing. Does anyone have a fix other than scarp my new head unit or buy a used ford head unit??. Thank you in advance RR

Wrong interface, according to PAC audios website. https://catalog.pac-audio.com/catalog/radio-replacement/rp4-fd11 Suppose to be for base model trucks only , look at the compatibility notes.