Lanzar Opti 6200 Help

Home / the12volt's Install Bay / Car Audio / Lanzar Opti 6200 Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

SeaWeasel

Member - Posts: 1

Joined: February 15, 2004

Location: United States

Posted: February 15, 2004 at 4:45 PM / IP Logged

I have a "new" Lanzar 6200 Optidrive rated at 33.3W RMS x 6 at 12 volts. Apparently, you can set this amp up about a million ways. I intend to use it to power multiple 6.5's and, hopefully, a pair of subs in a boat application. Does anyone have any experience with this unit? I am confused by the jumpers and the manner in which I can safely run it. Any help appreciated.

How do you Voodoo?

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 16, 2004 at 1:19 AM / IP Logged

Well if you have a six channel amp-hook all the speakers up to each channel.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

stratusfear69

Member - Posts: 40

Joined: November 30, 2003

Location: United States

Posted: February 16, 2004 at 1:52 AM / IP Logged

Teamrf...good answer, did you read what you wrote? "...ALL the speakers to each channel". I can see why your nickname is The Rookie. Anyways....

SEAWEASEL, I checked Lanzars website, but the only 6 channel amps they show are the VIBE635 and VPRO6300, so i'm not sure if your's is older? I'd give them a call and see if they could help you out...

http://www.lanzar.com/contacts.htm

Good luck...stratusfear69

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lanzar Opti 6200 Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.