Troubleshooting

Home / the12volt's Install Bay / Car Audio / Troubleshooting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 1:20 PM / IP Logged

I just installed a used Eclipse 5303 head unit today... It is connected to an audiobahn A4601Q amplifier.... After i connected everything, i powered it up.... It scanned hte channels and made presets, but made NO sound. I also pressed the open button, to acess the CD tray, but it wouldn't open. The only sound I got from teh speakers was the sound of the beeping of the head unit.... Is the deck dead? How can I troubleshoot?

~wayland

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: February 29, 2004 at 2:23 PM / IP Logged

Sounds like it's looking for the ESN code CD. Contact the seller and ask for the correct CD. If it's a legitimate sale, the CD should be provided. Otherwise it may be a stolen unit and is worthless without the correct CD.

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: February 29, 2004 at 4:06 PM / IP Logged

Dyohn, it wont be the ESN like you think. If ESN is activated the unit is totally inoperable except for allowing the cd to load. The display will read SEC or if it was showing SEC and the wrong cd was inserted 5 times, it will read CALL800. If the unit is scanning am/fm frequencies etc., the unit itself works fine. The beep sound does indeed come from the cd player (if my memory is correct) and is not through the speakers.

Did the amplifier turn on with the cd player?

Top Secret, I can tell you but then my wife will kill me.

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 4:14 PM / IP Logged

The amplifier turned on, and the beeping DID come through the speakers ( I know some units have the beeping on the head itself, like my Sony CDX-MP70)

~wayland

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: February 29, 2004 at 4:20 PM / IP Logged

Was the antenna plugged in? Check on the side of the cd player for a little switch. I can't remember for sure if that unit had one or not.

Top Secret, I can tell you but then my wife will kill me.

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 4:26 PM / IP Logged

The antenna was plugged in... I'll check for a switch

I also just bought a new metra harness for the stereo too, before i cut the other one down to a mere nothing....

It has the Orange and white positive dimmer, and the orange illumination switch.... The other harness i had only had the dimmer wire, and not illumination wire the eclipse says illumination for the orange and white wire....which do i solder to? The illumination one on the metra harness, or the dimmer one on the harness?

~wayland

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 4:31 PM / IP Logged

No switch...

~wayland

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 7:10 PM / IP Logged

So here's the update. There's no little switch, but the motor works.... I manually cranked the display down, and when i powered it up, it closed on its own....so it isn't the motor. How can I check for a faulty switch?

I never got to check for sound.....

~wayland

wayland1985

Silver - Posts: 353

Joined: December 31, 2003

Location: United States

Posted: February 29, 2004 at 7:12 PM / IP Logged

Is it possible for a normal person, like myself, to bench test a headunit? It would be much more convienient than going back and forth from the office, to the car, to see if my repairs work.... What kind of special equipment is needed?

~wayland

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Troubleshooting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.