amplifier bridging

Home / the12volt's Install Bay / Car Audio / amplifier bridging (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Usmc860222

Member - Posts: 21

Joined: March 04, 2004

Location: United States

Posted: March 04, 2004 at 6:58 PM / IP Logged

for the MA amplifier its a 450 peak 2 channel subwoofer. 225P per chanel and 300 bridged. if you had 2 450 watt suboofers would they get more power if you put one on each channel or if you bridged both of them, would they both receive the 300 peake and 150 rms then?

Back to Top

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: March 04, 2004 at 8:19 PM / IP Logged

You need to know the ohm ratings of the subs and the amp. for example if the amp is 2 ohm stable and the subs are 8 ohms each you can run the subs in parallel and bridge them at the amp. This way the amp would see 2 ohms and run at 300 watts according to your info. It all matters on the ohm ratings

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amplifier bridging

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.