Adding factory Cd Changer to Ford

Home / the12volt's Install Bay / Car Audio / Adding factory Cd Changer to Ford (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

robedsh

Member - Posts: 4

Joined: April 12, 2004

Location: United States

Posted: April 12, 2004 at 7:42 PM / IP Logged

Does anyone know if I can tap into the rear control wires to feed the changer and still use the rear controls? The Power connector for the unit has two sets of 4 wires the same except 1set is in metal tape w/ grounding wire? This model was only availible w/ in dash 6 changer. The changer i have came out of a 2000 f150. Need help Thanks in advance.

robert e. shelby

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 12, 2004 at 8:30 PM / IP Logged

What's the model number on the changer, and what Ford are you putting it in?

Back to Top

robedsh

Member - Posts: 4

Joined: April 12, 2004

Location: United States

Posted: April 12, 2004 at 8:49 PM / IP Logged

I only have a ford part # of xw1f-18c830-ab. I am putting it into a 2002 explorer sprot trac

robert e. shelby

Back to Top

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: April 12, 2004 at 9:05 PM / IP Logged

The best thing to do is first find out if there is a harness adapter that will enable you to plug it in without tapping into wires. Search these sites http://www.metraonline.com/locator.aspx and http://www.radiosandmore.com/ford.asp

Back to Top

robedsh

Member - Posts: 4

Joined: April 12, 2004

Location: United States

Posted: April 12, 2004 at 9:24 PM / IP Logged

With those applications i still would not be able to use the rear seat controls ? Would I with out taping into the control wire harness ? I appriciate the info .Thanks in advance.

robert e. shelby

Back to Top

robedsh

Member - Posts: 4

Joined: April 12, 2004

Location: United States

Posted: April 12, 2004 at 9:41 PM / IP Logged

found the wiring harness i needed # 2U6F-14588-BA.Thanks for everything.

robert e. shelby

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding factory Cd Changer to Ford

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.