Ti10's in Q-logic boxes

Home / the12volt's Install Bay / Car Audio / Ti10's in Q-logic boxes (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

chevyman26

Copper - Posts: 227

Joined: April 14, 2004

Location: United States

Posted: April 15, 2004 at 8:13 AM / IP Logged

I've got 2 Phoenix Gold Ti10's that I want to put into some q-customs boxes for the back doors on my tahoe. The boxes are 3/4" mdf, and the spec sheet with the subs says to use a minimum of 1" mdf. If I use the boxes anyways will it hurt the subs, or will I just go through boxes like mad? Any suggestions on strengthening the boxes without giving up too much air space?

You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."

One_Evil_Necro

Copper - Posts: 115

Joined: April 03, 2004

Location: United States

Posted: April 15, 2004 at 11:49 AM / IP Logged

You should be fine with 3/4

Search for other posts by One_Evil_Necro

kickerstang

Copper - Posts: 180

Joined: April 08, 2004

Location: United States

Posted: April 15, 2004 at 12:07 PM / IP Logged

how much airspace do the boxes have??

what!?!?! you want some??

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: April 15, 2004 at 2:01 PM / IP Logged

In this case you must choose the sub to fit the box, not the box to fit the sub. Reconsider either your choice of subs or choice of box, if you really want those Ti subs, then have the boxes custom built.

Top Secret, I can tell you but then my wife will kill me.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ti10's in Q-logic boxes

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.