speaker wires

Home / the12volt's Install Bay / Car Audio / speaker wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

southside

Copper - Posts: 220

Joined: March 08, 2004

Location: United States

Posted: April 15, 2004 at 6:42 PM / IP Logged

i have a 1501 bd amp is 16 gauge wire big enough for the sub to amp wires? plus what is matrix signal cables? are those rca's? plus on my amp it does have a flat plat to screw down on all the wries grd pwr an spkr. so do i have to get male connecters or something or can i screw the screws on to the wires themselves? thanks all.

southsider

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 15, 2004 at 7:35 PM / IP Logged

16 gage is fine. Matrix is a brand name for Rockford Fosgate RCA cables. You don't have to use those. Yes, simply twist the wires tight (or tin them with solder) and slip each one under the proper screw-down terminal plate, then tighten the screw. Make sure you disconnect your car battery positive cable before you install the amp.

Support the12volt.com

Back to Top

southside

Copper - Posts: 220

Joined: March 08, 2004

Location: United States

Posted: April 15, 2004 at 7:38 PM / IP Logged

i'm not that slow not to disconnect the amp speaker wires -- posted image.

but my amp doesn't have a plate it's a hole with a screw on top that u screw into the wire bue bare wie is ok hu?

southsider

Back to Top

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 15, 2004 at 7:52 PM / IP Logged

Yea, same idea. I know you're not slow, but there might be others reading this thread!

Support the12volt.com

Back to Top

southside

Copper - Posts: 220

Joined: March 08, 2004

Location: United States

Posted: April 15, 2004 at 7:59 PM / IP Logged

i know was being sarcastic, thanks again for wisdom

southsider

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

speaker wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.