Alpine V-Drive amplifier

Home / the12volt's Install Bay / Car Audio / Alpine V-Drive amplifier (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: April 17, 2004 at 12:30 AM / IP Logged

On these head units with the V-drive amp. They required a 10 gauge wire kit. My question is. What if you are NOT using the internal amp, do you still need to use a 10 gauge wire.

Kyle

Back to Top

sonicsound

Copper - Posts: 100

Joined: July 08, 2003

Location: Wisconsin, United States

Posted: April 17, 2004 at 9:54 AM / IP Logged

no you do not need to use a 10 guage wire if you are not using the amp. All you will be using the HU for is running CD's and and the crossovers inside the HU. And really all you need for wire for the HU is another wire hooked up to your 12V wire in your ignition harness to tap into the yellow 12V wire of the HU. Hope that helps...

Sonic

Pioneer AVH-P4000DVD

Zapco 360.4

Zapco 500.1

Zapco SP-4SL Processor

Two JL 10 W3v3d2

Alumapro 15 Farad Cap

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine V-Drive amplifier

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.