Hooking Up an Amplifier

Home / the12volt's Install Bay / Car Audio / Hooking Up an Amplifier (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

nickch

Copper - Posts: 50

Joined: June 01, 2004

Location: New Zealand

Posted: June 02, 2004 at 7:03 AM / IP Logged

Hi,

theres this 4 channel amp with the ratings:

4 x 100 Watts RMS at 4 Ohms

4 x 200 Watts Max at 4 Ohms

2 x 400 Watts Max at 4 Ohms Bridged

4 x 175 Watts at 2 Ohms .

I was wondering if its possible to hook up 2 channels to an pair of 6x9" each and bridge the other 2 channels for a sub. As it says there, 2x400W while Bridged. I was wondering if i could only have 1 bridged channel and another 2 channels for splits?

Thanks in advance

Nick

cd2478

Copper - Posts: 57

Joined: March 23, 2004

Location: Australia

Posted: June 02, 2004 at 7:41 AM / IP Logged

shouldnt be a problem mate.

cd2478

Copper - Posts: 57

Joined: March 23, 2004

Location: Australia

Posted: June 02, 2004 at 7:42 AM / IP Logged

ps..unless you have some kind of crossovers on your amp that wont let you choose both LP and HP at the same time.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hooking Up an Amplifier

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.