What type of Enclosure do I use?

Home / the12volt's Install Bay / Car Audio / What type of Enclosure do I use? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

onsatmex5

Copper - Posts: 52

Joined: June 06, 2004

Location: United States

Posted: June 13, 2004 at 10:19 AM / IP Logged

I just Purchasec 2 KICKER S10L7 SOLO-BARIC 10" SUBWOOFERS NEW 2004 SUBS, What type of ENCLOSURE Should I be looking into. I will be using A Kicker 1200.1 amp to push them.

Sub's Can be seen here,

http:///.com/dll?ViewItem&category=39777&item=5703086142&rd=1

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 13, 2004 at 10:25 AM / IP Logged

That link is to a 12"...

It depends on what you are after. I assume since you're going for Solobarics that you want it to be loud, so you'll need a ported anclosure built to the factory specs that will be in the speaker's owner's manual.

Support the12volt.com

onsatmex5

Copper - Posts: 52

Joined: June 06, 2004

Location: United States

Posted: June 13, 2004 at 10:37 AM / IP Logged

Here is the link to the 10's I have been looking at so many I was getting confused... What type of Enclosure do I use? -- posted image.

http:///.com/dll?ViewItem&category=39772&item=5704638376&rd=1

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

What type of Enclosure do I use?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.