Crossover connect question

Home / the12volt's Install Bay / Car Audio / Crossover connect question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Paul_g

Member - Posts: 2

Joined: June 16, 2004

Location: Canada

Posted: June 16, 2004 at 12:22 PM / IP Logged

I just bought JL Audio VR650CSi component speakers for rear fill, and I only want to hook up the drivers to the supplied JL crossovers but not the tweeters. Do I need a resistor between the tweeter terminals on the crossover to prevent damage to the amp or crossover? Will the crossover frequency change for the driver if I don't hook up the tweeters? Please Help!!!

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 16, 2004 at 12:33 PM / IP Logged

It's no problem to leave the tweeters disconnected.

Support the12volt.com

Paul_g

Member - Posts: 2

Joined: June 16, 2004

Location: Canada

Posted: June 16, 2004 at 7:20 PM / IP Logged

Thanks DYohn, I appreciate the help.....my mind is now at ease....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Crossover connect question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.