the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need recomendation on a sub


Post ReplyPost New Topic
< Prev Topic Next Topic >
jonbth 
Member - Posts: 42
Member spacespace
Joined: June 01, 2004
Location: United States
Posted: July 29, 2004 at 12:06 AM / IP Logged  
I have a Nissan Frontier pick up that has one pair of component speakers and I want to get a small sub woofer. The amp I have is 30W X 4 at 12 volts and plan to bridge the amp to run the sub. I don't need to be heard a mile away and don't need to rattle the body panels off my truck. What would be better, an 8 or 10 inch sub? Single or dual voice coil? 4 or 2 ohms?
xtreamcc 
Silver - Posts: 467
Silver spacespace
Joined: March 24, 2004
Location: United States
Posted: July 29, 2004 at 12:13 AM / IP Logged  
get an 8" sub with dual 4 Ohm coils in a sealed box. That way you can bridge all 4 channels into the single sub. Check out some of the Rockfords if ur lookin for heavy bass or else check out JL/Infinity/Cerwin-Vega's if ur lookin for more sound quality. If you want tighter bass you might also think about get'n the 10" instead of the 8"
"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"
02 Jeep Grand Cherokee
Monster System on its way.
jonbth 
Member - Posts: 42
Member spacespace
Joined: June 01, 2004
Location: United States
Posted: July 29, 2004 at 12:20 AM / IP Logged  

xtreamcc wrote:
get an 8" sub with dual 4 Ohm coils in a sealed box. That way you can bridge all 4 channels into the single sub. Check out some of the Rockfords if ur lookin for heavy bass or else check out JL/Infinity/Cerwin-Vega's if ur lookin for more sound quality. If you want tighter bass you might also think about get'n the 10" instead of the 8"

I'm only bridging 2 channels for the sub so I'll be putting about 60 watts rms power thru it.

xtreamcc 
Silver - Posts: 467
Silver spacespace
Joined: March 24, 2004
Location: United States
Posted: July 29, 2004 at 12:23 AM / IP Logged  
nah, what I'm say'n is this: If you bridge 2 channels of the amp to one coil and bridge the other 2 to the other coil you'll be pushing the sub with the entire 120 watts bridged which should RMS at like 100 and peak around 200. If your planning to use the other 2 channels to run componets/Fr speakers/etc then I'd say go with a SVC 4 Ohm speaker and just bridge the 2 channels to it like you said. I just though u were going to dedicate the amp to the sub and thats why I thought u'd want to get its full potential.
"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"
02 Jeep Grand Cherokee
Monster System on its way.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer