Problems with cadence 4ch

Home / the12volt's Install Bay / Car Audio / Problems with cadence 4ch (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: August 18, 2004 at 4:08 PM / IP Logged

Hey guys,

Got my new Cadence 4ch amp hooked up finally today. Having a problem though. I have it set to 4 channel mode and only have channles 1&2 hooked up at the moment to the mains. I am only getting a signal out of channel 1 and not 2 . The RCA connections are fine as I switched them to make sure. What could be the problem? Oh Yeah, I did check both sets of speakers to assure propper hook up there as well. Could the amp be bad?

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: August 18, 2004 at 4:41 PM / IP Logged

Yes, could be. Try 3 and 4.

Support the12volt.com

Back to Top

racer427

Silver - Posts: 381

Joined: August 04, 2004

Location: United States

Posted: August 18, 2004 at 5:19 PM / IP Logged

Thanks DYhon, I figured it out. MY BAD, when reinstalling the head unit the other day, I, somehow pulled one of the rca's partially out of the unit. All is good and this is a great amp.

Alpine CDA-9833 HU

Diamond Audio M661 Components

MTX Thunder T6.6 Components:rear fill:

Cadence Q400 4 Channel Mains + rears

Thunder 801D Subs

MTX 1004 10's

Dual 4g wire to rear

4g grounds

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problems with cadence 4ch

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.