the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Bazooka EL1500 mono amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
racer427 
Silver - Posts: 381
Silver spacespace
Joined: August 04, 2004
Location: United States
Posted: August 30, 2004 at 8:32 PM / IP Logged  

Hey guy's,

     Just woundering if anyone has or has had any exerience with the above mentioned or any of Bazookas amps. Ok? sh*ty? My buddy has this one he wants to sell as he needs the money and the power rating seems to be just right for my MTX 8000 10" er's.

 Also, this amp has a set of full range preamp outputs. Would it be safe to say that I could use the crossover in the amp and run the preamp outputs to my Candence 4 channel via y connectors?

Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: August 30, 2004 at 9:16 PM / IP Logged  
Since he's your buddy he should be okay with you setting up the amp and measuring its output to make sure it will power your subs properly.  That would make it a "conditional" purchase.  And yes, the output won't be affected by the amp's crossover settings.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: August 30, 2004 at 9:28 PM / IP Logged  
I would try it out first I know the 8000's take alot more power then recommended, but just the RMS rating is good enough for some, yes running the full range output will be fine as long as your cadence has an eq to adujst the frequency's.
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer