Mach460, New deck to stock

Home / the12volt's Install Bay / Car Audio / Mach460, New deck to stock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

EluminusSVT

Member - Posts: 8

Joined: September 29, 2004

Posted: October 01, 2004 at 9:17 PM / IP Logged

Ok, I tried posting before about my speakers popping when I turn on the car. (I have a Aiwa CDC-X227 head unit and was installing it with a Schocshe harness and Scosche Speaker Line Converter.)

After connecting everything (the right way, I've done this a million times before), I come to find out that the Cobra's wondeful Mach 460 system is a b**** to work on. Anyways, someone in that post said that it may be my speaker line converter and to just hook up the Aiwa head unit with the wiring harness straight to the car.

Will...this...work...? Anyone? Thanks for the help everybody!

rallysport

Copper - Posts: 172

Joined: April 10, 2004

Location: United States

Posted: October 01, 2004 at 9:28 PM / IP Logged

ditch the lineout coverter and plug the rcas straight into the deck.

EluminusSVT

Member - Posts: 8

Joined: September 29, 2004

Posted: October 01, 2004 at 9:52 PM / IP Logged

Huh? What RCA's? There are none. I am installing an aftermarket deck with a wiring harness to the stock wiring harness. I am sorry, I am probably just missunderstanding but there are no RCA/s immediately coming to the deck. There will be RCA's, but they're going out to my Sony Amp and Xplod subs after this is installed. Right now I'm just putting in the the deck.Thank you very much for your help.

rallysport

Copper - Posts: 172

Joined: April 10, 2004

Location: United States

Posted: October 01, 2004 at 10:10 PM / IP Logged

youve got me good and confused :)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mach460, New deck to stock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.