Seeting EQ and Xover

Home / the12volt's Install Bay / Car Audio / Seeting EQ and Xover (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mpathy

Member - Posts: 47

Joined: October 05, 2004

Posted: October 24, 2004 at 7:50 PM / IP Logged

What is the best way to set my Xover and EQ so that it sounds good ? Is this a personal preference thing or is there a specific way to do it ?

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: October 24, 2004 at 7:59 PM / IP Logged

Read the pages at http://www.bcae1.com .. make sure you understand what these devices actually do before you play around. Once you know what they do, yes, you can set by ear, or with the help of a real time analyzer (better option).

If you don't want to take the time to learn, hire a professional to do it for you. Be careful - if you are careless with those devices you can easily damage speakers.

New Project: 2003 Pathfinder

mpathy

Member - Posts: 47

Joined: October 05, 2004

Posted: October 24, 2004 at 8:17 PM / IP Logged

Thanks for the tip....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Seeting EQ and Xover

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.