can i wire DVC sub like this

Home / the12volt's Install Bay / Car Audio / can i wire DVC sub like this (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

el_cabong

Member - Posts: 3

Joined: October 19, 2004

Posted: October 27, 2004 at 12:51 PM / IP Logged

i have a pioneer class d mono amp putting out 350WRMS going to one infinite 12.1d sub can i wire it like the following

| +--------------------+ -

amp | sub

| - ------------------- - +

dxav

Silver - Posts: 314

Joined: September 11, 2002

Location: United States

Posted: October 27, 2004 at 1:27 PM / IP Logged

Is that sub a DVC, and is it 4 Ohm coils or 2 Ohm coils? What is the impedance the amp wants to see if wired in mono?

Need a little info here.

DXAV

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: October 27, 2004 at 1:28 PM / IP Logged

Same sub that I have. Sounds awesome. What are the specks on the amp, because you'll be running it at 2 ohms. But basically you'll wire it like so:

can i wire DVC sub like this -- posted image.

Enjoy,

Paul

Francious70

Silver - Posts: 629

Joined: July 26, 2004

Location: United States

Posted: October 27, 2004 at 1:32 PM / IP Logged

dxav, it's a 4 ohm DVC sub. So either the amp is going to see 2 ohms, or 8 ohms. If that amp is rated @ 350 watts @ 4 ohms then you'll actually be feeding the subs 700 watts. That's a little much. But most mon-block d-calss amps are named for their 2 ohm output.

Paul

dxav

Silver - Posts: 314

Joined: September 11, 2002

Location: United States

Posted: October 27, 2004 at 1:35 PM / IP Logged

Ok, Francious70. 2Ohm sounds good. Then, depending on his amp in mono @ 2 Ohms, your sub/amp config should work great on his system.

DXAV

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: October 27, 2004 at 3:51 PM / IP Logged

D class mono amp with a 4 ohm dvc sub = this scenario

Wiring Option #1

Top Secret, I can tell you but then my wife will kill me.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

can i wire DVC sub like this

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.